My New Truck

Got a build-up or ongoing project happening? Tell us about it here

Moderator: Moderator Team

Postby Evil » Fri Aug 20, 2010 10:40 am

Well my Hi Mount arrived today thank god i only payed $700 for it.

In side was full to the top with Shity milky water with like mud stuck on bottom of casing :shock:
The Free fool Leaver is Broken so will need new one of them
Anyone no where i can get one from?

Over all the rest is in good nick.
Its going to Flamin Fab in next week to have it Over halled get the brake bolted, Fill and drain plugs and Cross bracing at the back of the winch.


Image

Image

Image
LWB Mav with extras
User avatar
Evil
MUD MAGNET
MUD MAGNET
 
Posts: 696
Joined: Tue Jan 01, 2008 4:13 pm
Location: S/E Melbourne

Postby Evil » Wed Aug 25, 2010 11:17 pm

Well my hi mount is off to Flamin Fab on Friday.
Was looking at it today thinking it needs a good clean up before i drop it off

So got out the wire wheel out 1000grit wet n dry sand paper and this is the result


Image

Image
LWB Mav with extras
User avatar
Evil
MUD MAGNET
MUD MAGNET
 
Posts: 696
Joined: Tue Jan 01, 2008 4:13 pm
Location: S/E Melbourne

Postby to_easy » Wed Aug 25, 2010 11:42 pm

boy that came up good [looksgreat]
You know what I did before I married? Anything I wanted to.
User avatar
to_easy
Patarazzi
Patarazzi
 
Posts: 1748
Joined: Mon Dec 24, 2007 2:07 pm
Location: NEWCASTLE, NSW

Postby Evil » Mon Sep 06, 2010 6:14 pm

Well in the arvo today got bored and though i make a swing over arm that locks my Jerry's in place.

And come up with this..! It swings over to other side and lines up with a 2 washes one on jerry holder one on arm and padlock them together.

Its ruff as guts but it will do.

Image
LWB Mav with extras
User avatar
Evil
MUD MAGNET
MUD MAGNET
 
Posts: 696
Joined: Tue Jan 01, 2008 4:13 pm
Location: S/E Melbourne

Postby Evil » Sun Sep 12, 2010 2:25 am

Well picked up my Hi Mount from flaming Fab today and what a awesome job Wazza did.

Hi Mount now has
Fill n Drain Plugs
Brake shaft bolted
6hp motor
T Bars
New free spool lever and R clipped

Image

And a pick of it bolted up

Image


And also think the winch sits to high for my liking so going to mod the bar and bring the winch done lower.
Beats me why its so high and looks odd and strange lol.
LWB Mav with extras
User avatar
Evil
MUD MAGNET
MUD MAGNET
 
Posts: 696
Joined: Tue Jan 01, 2008 4:13 pm
Location: S/E Melbourne

Postby Evil » Tue Sep 14, 2010 4:31 pm

Well winch is all wired up now incab controls and buttons on grill for out side use.

This is how the car sits now

Image

Image

Image


And sold the daul subs out of the back put the single 12inch sub in i got off Cam in and put a frige on the side of the sub.

Image

And in 3 weeks when the bloke that dose my roadys comes back from hims holiday im going to go him and speak terms of getting a rwc
so i can put the smurf in my name instead of my mates
LWB Mav with extras
User avatar
Evil
MUD MAGNET
MUD MAGNET
 
Posts: 696
Joined: Tue Jan 01, 2008 4:13 pm
Location: S/E Melbourne

Postby thebludger » Tue Sep 14, 2010 6:14 pm

looking good luke :D
Im not a gyno but ill take a look at it for you!


Its a GQ thing, everyone understands

TOMORROW IS NEVER GUARANTEED
User avatar
thebludger
TOURER
TOURER
 
Posts: 2638
Joined: Fri Dec 14, 2007 12:52 am
Location: Right Here

Postby Evil » Sun Sep 19, 2010 8:26 pm

Well had a trip up to Mt skene on the weekend to see if there was much snow left.
And yup there was heaps...! We didnt make it to the Sumit snow was just to deep and thick. We were about 300mts from the top so turned around and camped in the snow just down alittle bit.


Some pics of the Smurf in the snow

Image

Image

Image

Image

Image

Image

Image
LWB Mav with extras
User avatar
Evil
MUD MAGNET
MUD MAGNET
 
Posts: 696
Joined: Tue Jan 01, 2008 4:13 pm
Location: S/E Melbourne

Postby to_easy » Sun Sep 19, 2010 8:50 pm

[looksgreat] boy that looks cold.
You know what I did before I married? Anything I wanted to.
User avatar
to_easy
Patarazzi
Patarazzi
 
Posts: 1748
Joined: Mon Dec 24, 2007 2:07 pm
Location: NEWCASTLE, NSW

Postby Evil » Wed Sep 22, 2010 8:16 pm

And here's a small vid of me trying to push my way though the snow

http://www.youtube.com/watch?v=qAYYXf3k9qI
LWB Mav with extras
User avatar
Evil
MUD MAGNET
MUD MAGNET
 
Posts: 696
Joined: Tue Jan 01, 2008 4:13 pm
Location: S/E Melbourne

Postby Evil » Thu Sep 30, 2010 11:25 am

Bought some 37 Procomps pick em up next thursday.
So stay tune for pics
LWB Mav with extras
User avatar
Evil
MUD MAGNET
MUD MAGNET
 
Posts: 696
Joined: Tue Jan 01, 2008 4:13 pm
Location: S/E Melbourne

Postby thebludger » Sat Oct 02, 2010 9:45 am

Evil wrote:And here's a small vid of me trying to push my way though the snow

http://www.youtube.com/watch?v=qAYYXf3k9qI


cool nice one
Im not a gyno but ill take a look at it for you!


Its a GQ thing, everyone understands

TOMORROW IS NEVER GUARANTEED
User avatar
thebludger
TOURER
TOURER
 
Posts: 2638
Joined: Fri Dec 14, 2007 12:52 am
Location: Right Here

Postby Evil » Mon Oct 04, 2010 2:48 pm

Well this arvo i looked in to bolting up my Tow bar to smurf witch i couldnt has all the Captive Nuts were gone so
wasnt able to bolt the standand tow bar up.

So i cut the Hit off the bar and welded it to my rear bar with some cross bracing
I wont be towing and heavy with it mainly there so i can tow just standand 6x4 tailer to tip with rubish or motor bike tailer to the bush
to go riding.


Image

Image
LWB Mav with extras
User avatar
Evil
MUD MAGNET
MUD MAGNET
 
Posts: 696
Joined: Tue Jan 01, 2008 4:13 pm
Location: S/E Melbourne

Postby Evil » Fri Oct 08, 2010 11:03 am

Well the Mav now rolling on 37 procomps

Image

Image
LWB Mav with extras
User avatar
Evil
MUD MAGNET
MUD MAGNET
 
Posts: 696
Joined: Tue Jan 01, 2008 4:13 pm
Location: S/E Melbourne

Postby Evil » Fri Oct 08, 2010 6:07 pm

Well driving to Dandy the rear diff in smurf decided it would GO BANG so was total care tow home.
It looked that it had been wearing for a very very long time and fact that was only about 900mm of oil in the the diff :shock: :shock:

Removed all axles and center to see chucks bigger then my thumb off the pinion.

Was about 5 of these size chunks that fell out on removal

Image

Image
LWB Mav with extras
User avatar
Evil
MUD MAGNET
MUD MAGNET
 
Posts: 696
Joined: Tue Jan 01, 2008 4:13 pm
Location: S/E Melbourne

PreviousNext

Return to BUILD UPS & ONGOING PROJECTS

Who is online

Users browsing this forum: No registered users and 2 guests

cron